Carbon Monoxide: The silent killer!

As the home heating season approaches, the U.S. Consumer Product Safety Commission (CPSC) urges consumers to have a professional inspection of all fuel- burning appliances -- including furnaces, stoves, fireplaces, clothes dryers and space heaters -- to detect deadly carbon monoxide (CO) leaks.

These appliances burn fuels -- typically gas, both natural and liquefied petroleum; kerosene; oil; coal; and wood. Under certain conditions, these appliances can produce deadly CO, but with proper installation and maintenance, are safe to use.

CO is a colorless, odorless gas produced by burning any fuel. The initial symptoms of CO poisoning are similar to flu, and include headache, fatigue, shortness of breath, nausea and dizziness. Exposure to high levels of CO can cause death.

"CO poisoning associated with using fuel-burning appliances kills more than 200 people each year and sends about 10,000 to hospital emergency rooms for treatment," said CPSC Chairman Ann Brown.

CPSC recommends the yearly, professional inspection include checking chimneys, flues and vents for leakage and blockage by creosote and debris. Leakage through cracks or holes could cause black stains on the outside of the chimney or flue. These stains can mean that pollutants are leaking into the house. Also, have all vents to furnaces, water heaters, boilers and other fuel-burning appliances checked to make sure they are not loose or disconnected.

Make sure your appliances are inspected for adequate ventilation. A supply of fresh air is important to help carry pollutants up the chimney, stovepipe or flue, and is necessary for the complete combustion of any fuel. Never block ventilation air openings.

CPSC recommends that every home should have at least one CO detector that meets the requirements of the most recent Underwriters Laboratories 2034 standard or International Approval Services 6-96 standard.

Consumers should also have the vent pipes on their heating systems inspected. Earlier this year, virtually the entire furnace and boiler industry together with the manufacturers of high-temperature plastic vent (HTPV) pipes joined with CPSC to announce a vent pipe corrective action program. The program's purpose is to replace, free of charge, an estimated 250,000 HTPV pipe systems attached to gas or propane furnaces or boilers in consumers' homes. The HTPV pipes could crack or separate at the joints and leak CO.

Consumers can check the vent pipes attached to their natural gas or propane furnaces or boilers to determine if they are part of this recall. They can be identified as follows: the vent pipes are plastic; the vent pipes are colored gray or black; and the vent pipes have the names "Plexvent", "Plexvent II" or "Ultravent" stamped on the vent pipe or printed on stickers placed on pieces used to connect the vent pipes together. Consumers should also check the location of these vent pipes. For furnaces, only HTPV systems that have vent pipes that go through the sidewalls of structures (horizontal systems) are subject to this program. For boilers, all HTPV systems are subject to this program. Other plastic vent pipes, such as white PVC or CPVC, are not involved in this program.

After checking the vent pipes, consumers should call the Corrective Action Program toll-free at (800) 758-3688, between 7 a.m. and 11 p.m. EDT , seven days a week, to verify that their appliance venting systems are subject to this program. Consumers with eligible systems will receive new, professionally installed venting systems free of charge. Additionally, consumers who already have replaced their HTPV pipe systems may be eligible for reimbursement for some or all of the replacement costs.

When good heat exchangers go bad!

Furnaces create heat by burning fuel (gas, oil, or propane). When the fuel burns, it generates hot gasses which travel through curved metal tubing called a heat exchanger . As air passes over the heat exchanger, it absorbs heat from the hot metal surface. The heated air is then circulated through ducts to warm your home or place of business. Meanwhile, the gasses that are created by the burning fuel are released outside through a vent pipe.

A furnace which is cracked or contains holes or small leaks can release carbon monoxide into your home or place of business. Carbon monoxide is colorless, odorless, and tasteless and is virtually impossible for the human senses to detect. Most accidental carbon monoxide poisonings occur from house fires, malfunctioning home-heating systems and hot-water heaters. While the symptoms vary significantly, the most common symptoms are headache, nausea, vomiting, dizziness and fatigue. On-going carbon monoxide poisoning may lead to coma and death.

To reduce the risk of carbon monoxide poisoning inside your home or place of business, have your furnace inspected annually by an experienced technician. An annual check-up should include a thorough inspection of the heating unit for cracks, holes, and leaks. To reduce the risk of fire, the flame should checked for a proper mixture of air and gas. Likewise the safety and limit switches should be tested to insure that the fan runs whenever the heat exchanger is hot and that the unit will shut off should the flame burn beyond the confines of the box.

Here are some examples of bad heat exchangers:

These problems are quite severe and with yearly inspections could have been fixed long before they became this severe.

With our highly trained staff armed with the latest in technology we can catch these problems long before they can harm your most valuable assest... Your family.